4.USING N/W-FAX DRIVER (NETWORK FAX)
When LDAP authentication is enabled
When LDAP authentication is enabled on this equipment, you must specify an LDAP server in the
[Server Name] box on the [Send] tab before sending a fax.
If you attempt to send a fax without specifying an LDAP server, the [Specify LDAP Server] dialog box will
appear to ask you to do so.
In this case, specify the desired LDAP server in the [Server Name] box and click [OK] to send the fax.
If you want to change the settings of an LDAP authentication, carry it out on the [Device Settings] tab.
P.121 "Setting up the [Device Settings] tab"
100 Sending Network Faxes