Pausing Transmission; Canceling Reserved Transmissions - Toshiba GD-1370 Fax Manual

2.USING THE FAX UNIT (BASIC OPERATION)
 Pausing transmission
You can stop a transmission job during scanning.
Even if you cancel transmission in the direct Tx mode, the part of the original that was scanned before
transmission is canceled has been sent.
Press [Stop] displayed on the screen while the originals are being scanned.
1
The scanning and transmission are stopped.
 Canceling reserved transmissions
You can display the list of the reserved transmissions, and cancel the reserved transmissions that are in
the queue or in progress.
Press [Job Status], and then press [Fax].
1
The list of the reserved transmissions is displayed. This step is the same as that for checking the
reserved transmission.
 P.54 "Checking reserved transmissions"
Select the reserved transmission you want to delete, and then press [Delete].
2
More than one job can be selected.
In the "Status" column, you can check the status of the reservation. "Wait" indicates that the data
are waiting to be sent. "Line1" or "Line2" indicates that the data are being sent. Delayed
transmission reservation and polling transmission/reception can be canceled.
The confirmation screen for the deletion is displayed. Press [Delete].
3
Canceling the Transmission 59