Product Overview; Controls - Toro 22318 Operator's Manual

Product Overview

5
4
3
2
1
1. Mount plate
2. Tilt cylinder
3. Auxiliary hydraulic couplers
4. Loader arms
5. Hood

Controls

Become familiar with all the controls (Figure 6) before
you start the engine and operate the traction unit.
6 3 1
G005160
1. Traction control levers
2. Attachment tilt lever
3. Loader arm lever
4. Auxiliary hydraulics lever
5. Speed selector lever
Key Switch
The key switch, used to start and stop the engine, has
three positions: off, run, and start.
To start the engine, rotate the key to the start position.
Release the key when engine starts and it will move
automatically to the run position.
6. Fuel tank
7. Lift cylinder
8. Tow valve
9. Wheel
10. Operator platform
5 2 4
7 8 9
Figure 6
6. Throttle lever
7. Choke lever
8. Key switch
9. Hour meter/tachometer
17
16
15
6
14
7 13
8
12
9
11
10
Figure 5
11. Counterweight
12. Engine
13. Air cleaner
14. Thigh support
15. Control panel
To stop the engine, rotate the key to the off position.
Throttle Lever
Move the control forward to increase the engine speed
and rearward to decrease speed.
Choke Lever
Before starting a cold engine, move the choke lever
forward. After the engine starts, regulate the choke to
keep the engine running smoothly. As soon as possible,
move the choke lever all the way rearward.
Note: A warm engine requires little or no choking.
Traction Control Levers
• To move forward, move the traction control levers
forward. To move rearward, move the traction
control levers rearward.
• To go straight, move both traction control levers
equally.
• To turn, move the lever located on the side you
want to turn back toward the neutral position while
keeping the other lever engaged.
11
16
4
8
G005287
16. Lift points
17. Handles