Engine Maintenance; Servicing The Air Cleaner - Toro 22318 Operator's Manual

Figure 18
4. Pump grease into the fittings until grease begins to
ooze out of the bearings (approximately 3 pumps).
5. Wipe up any excess grease.

Engine Maintenance

Servicing the Air Cleaner

Service Interval: Every 200 hours—Replace the
primary filter. (Service more
frequently if conditions are extremely
dusty or sandy.)
Yearly—Replace the safety
(secondary) air filter. (Service
more frequently if conditions are
extremely dusty or sandy.)
Important: Do not clean the filters. Cleaning them
may damage them, allowing contaminants into the
engine.
Removing the Filters
1. Lower the loader arms, stop the engine, and remove
the key.
2. Release the latches on the air cleaner and pull the air
cleaner cover off of the air cleaner body (Figure 19).
1. Air cleaner cover
2. Latches
3. Primary filter
3. Clean the inside of the air cleaner cover with
compressed air.
4. Remove the rubber outlet on the cover and clean it
and the port it covers thoroughly.
5. Replace the rubber outlet.
23
Figure 19
4. Air cleaner body
5. Safety filter
6. Rubber outlet