Table of Contents
Advertisement
Figure 89
Front Axle
1. Front-axle housing
2. Oil-servicing equipment
3. Fill plug
4. Pinion housing
5. Sight port
1. Rear-axle housing
2. Forward
3. Oil-servicing equipment
6. Fill the axles with the specified oil through the sight
port until the oil is level with the threads at the bottom
of the port
(Figure 89
7. Wait a few minutes for the oil to settle, then add more
oil as necessary.
Note: Continue to add oil until the oil level stabilizes
and is at the bottom of the threads of the sight port.
8. Install the fill plugs into the sight ports of the pinion
housings for the axles
59
Figure 90
Rear Axle
4. Fill plug
5. Sight port
and
Figure
90).
(Figure 89
and
Figure
90).
Advertisement
Table of Contents
