Toro 25500 Operator's Manual page 27

Using the Home Screen
Use the previous screen, next screen, down screen, or up
screen buttons to display either the rpm home screen (A of
Figure 30), the % load home screen (B of
main selection screen (C of
Figure 30
1. Previous screen button
2. Next screen button
Understand the meaning of the icons that indicate the
functions and the state of the machine.
Figure 30) or the
Figure 30).
3. Down screen button
4. Up screen button
1. Gear indicator
2. Parking brake indicator
3. Tachometer
4. Machine or engine error
5. Low engine-oil pressure
Reading the Operating Indicators in the Command
Display
Display the home screen of the command center to find
information about the transmission, engine, hydraulic system,
and fuel quantity.
•
Gear indicator—This indicator shows which gear is
selected for the transmission (gears 1 through 4) and is
displayed above and to the left of tachometer
•
Tachometer—The tachometer indicates the engine
speed in revolutions per minute (rpm). The tachometer
is displayed in the upper center of the command-center
display (Figure 31).
Note: Each number on the gauge is equal to x 100 rpm.
Each space on the gauge is equal to 600 rpm. The range
of the tachometer display is 0 to 3000 rpm.
•
Hour meter—The hour meter indicates the number
of hours that the engine has run. It is displayed in the
center right area of the command display, to the right of
the tachometer (Figure
•
Hydraulic-fluid temperature indicator—This indicator
shows the operating temperature of the hydraulic fluid
and is displayed in the lower left area of the command
display (Figure 31).
Note: If the indicator moves into the red area, reduce
the work speed. If the gauge remains in the red area, stop
the machine and move the direction control lever to the
Neutral position. Check the oil level and for obstructions
in the radiator or the oil cooler.
•
Coolant temperature indicator—This indicator shows
the temperature of the coolant in the engine-cooling
system. It is displayed in the lower center area of the
instrument cluster
27
Figure 31
6. Check alternator or battery
7. Hour meter
8. Hydraulic-fluid
temperature
9. Coolant temperature
10. Fuel level
31).
(Figure 31).
(Figure 31).