Table of Contents
Advertisement
1. Wait-to-start-engine indicator
Reading the Machine or Engine Error Indicators in the
Command Display
Note: When a warning indicator is shown in the command
display, take corrective measures immediately.
1. Hydraulic-charge filter
restriction (transmission)
2. Hydraulic-charge filter
restriction (accessories)
3. Hydraulic-return filter
restriction
•
Hydraulic-charge filter restriction
(transmission)—This message is displayed if
the hydraulic-charge filter for the transmission is restricted
(
Figure
35).
Note: If this message is displayed, stop the engine and
replace the hydraulic-charge filter for the transmission.
•
Hydraulic-charge filter restriction
(accessories)—This message is displayed if the
charge filter for the hydraulic circuit for the accessories is
restricted
(Figure
35).
Note: If this warning message is displayed, stop the
engine and replace the charge filter for the hydraulic
circuit for the accessories.
•
Hydraulic-return filter restriction—This message is
displayed if the hydraulic-return filter is restricted
35).
Figure 34
Figure 35
4. Hydraulic-charge filter
restriction (traction motor)
5. Air-filter restriction
(engine)
6. Return the joystick to
neutral indicator
Note: If this message is displayed, stop the engine and
replace the hydraulic-return filter.
•
Hydraulic-charge filter restriction (traction
motor)—This message is displayed if the charge filter for
the traction motor is restricted
Note: If this message is displayed, stop the engine and
replace the hydraulic-charge filter for the traction motor.
•
Air-filter restriction (engine)—This message is
displayed when the air filter requires service
•
Return to Neutral indicator—This indicator is
displayed if you attempt an operation that requires you to
return the joystick or the traction pedal to the Neutral
position. Return the joystick or the traction pedal to the
Neutral position before continuing operation
Note: This message also appears if you start the engine
when either the utility drive or the attachment joysticks at
the operator seat are not in the Neutral position. Move
the joysticks to the Neutral position to clear the warning.
(Figure
29
(Figure
35).
(Figure
35).
(Figure
35).
Advertisement
Table of Contents
