Toro RT1200 Manual

Plow Mount Cable Guide Kit
RT1200 Trencher
Model No. 25407
Model No. 25407E
Note: The machine must be equipped with the Vibratory Plow Kit.
This product contains a chemical or chemicals known to the State of California to
Preparing the Machine
1. Move the machine to a level surface.
2. Set the parking brake and lower the attachments to
the ground.
3. Stop the engine and remove the key.
4. Remove the hardware on the shaker box.
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
WARNING
CALIFORNIA
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
Register at www.Toro.com.
Installing the Cable Guide
Installing the Brackets
Right bracket Left bracket
1x
Original Instructions (EN) All Rights Reserved *3407-261* A
Printed in the USA
Form No. 3407-261 Rev A
Installation Instructions
Bolt 5/16 x 1-1/4
inch
1x 16 x