General Precautions On Disassembly - Samsung CLX-FIN40S Service Manual

3. Replacement procedure
3.1 General precautions on disassem
When you disassemble and reassemble components,
of cables to moving parts makes proper routing a mus
by the procedure must be restored as close as possib
component from the machine, note the cable routing th
Whenever servicing the machine, you mus
1. Check to verify that documents are not stored in me
2. Be sure to remove the toner cartridge before you dis
3. Unplug the power cord.
4. Use a flat and clean surface.
5. Replace only with authorized components.
6. Do not force plastic-material components.
7. Make sure all components are in their proper positio
8. When disassembling the Bridge and Finisher, B
Service Manual
CLX-FIN40S/CLX-FIN40L
3. Replaceme nt Procedure
mbly
you must use extreme caution. The close proximity
st. If components are removed, any cables disturbed
le to their original positions. Before removing any
hat will be affected.
st perform the following:
emory.
sassemble parts.
on.
Be careful not to be damaged the connectors
3- 1
SAMSUNG ELECTRONICS