Samsung CLX-FIN40S Service Manual page 12

1.4.2 Media Type & Condition
Special Paper: Finisher must be able to handle special types of papers such as Tab, Archive,
Transparencies, etc (See 1.4.3). A slight underperformance is tolerable for special
papers, however it must not damage the paper in any case.
Static : All static must be controlled so that it would not harm the quality of the stack. Users must never
be shocked by static from the finisher body or finisher's any module.
Curl : Finisher shall handle ±1/2" curled output as delivered from the IOT.
['Curl' measuring method]
A3(mm)
A1(mm)
Feeding Direction
Skew : Finisher must be able to control 'skew' of the sheet received from the IOT. The skew must be
less than 1% of the length of the paper received from IOT main body (feeding direction).
Service Manual
CLX-FIN40S/CLX-FIN40L
1. Specification
Glass
10 sheets
Radius(R)
A4(mm)
A = MAX (A1,A2,A3,A4)
A2(mm)
1-7
A
SAMSUNG ELECTRONICS