Door Box Adaptor; Guidelines - Panasonic DBS 824 Installation Manual

Door Box Adaptor
Door Box Adaptor
Telephones and Peripheral Equipment
Guidelines
l
The Door Box Adaptor (VB-437
11)
requires a door opener. Ln addition, a
Door Box (door phone) (VA-43705) is normally used with the Door Box
Adaptor. The door opener is not sold by Panasonic; it can be purchased
separately from an electronics dealer.
l
Each Door Box and opener use one extension port.
l
The following tools are required to install the Door Box Adaptor:
- Phillips screwdriver
- Needle-nose pliers
- Diagonal cutters
lnstalla tion
1. Remove the cover from the Door Box Adaptor.
2. Remove the cable punch-out plate (Figure 5-20) in order to make an
opening for the cables coming into the Door Box Adaptor.
To remove the plate, cut the grooves on either side with diagonal cutters.
Then bend the plate back and forth with needle-nose pliers to remove it.
Figure S-23. Cable punch-out plate
,D
oor Box Adaptor
3. Mount the Door Box Adaptor on the wall using the three screws provided
with the unit
5-28
DBS 824-l O-300
Issued 3/l /95