Auto Set Relocation Code - Panasonic DBS 824 Installation Manual

FF3
Auto Set Relocation Code
Auto Set Relocation Code
Software Version: CPC-S and CPC-M, Version 1.0 and higher
Address: FF3 (ExtPort)# 40# (OOOl-9999)#
Description
You can relocate (or swap) the program settings of one phone to another. The
Auto Set Relocation Code enables you to perform the relocation.
For example, if the phone of extension 102 is unplugged and moved to an
office with a wall jack (port) assigned to extension 103, this feature can be
used to relocate 102's programming to 103. In order to move the
programming, an Auto Set Relocation Code must be assigned for extension
103.
Programming
To assign an Auto Set Relocation Code . . .
Notes
FF3 (l-1 6 or I-24)# 40# (OOOl-9999)#
f
- f
Extension Port
(Destination):
CPC-S: 1-16
CPC-M: l-24
Auto Set Relocation Code
(0001-9999)
To clear an Auto Set Relocation Code . . .
FF3 (l-16 or l-24)# 40#/ CONF ON/OFF
Moving An Extension. The following procedure explains how to move the
program settings from extension 102 to extension 103.
1.
At extension 102, pick up the handset
2. Press "#lO."
3.
Dial extension number 103.
4. Enter the four-digit Auto Set Relocation Code assigned to
extension 103.
Issued 3/l /95
DBS 824-l O-400
3-45