Panasonic DBS 824 Installation Manual page 65

Voice Announce Unit (VAU)
Telephones and Peripheral Equipment
3. Remove the cable punch-out plate (Figure 5-20) to make an opening for
the cab!e coming into the VAU.
'\
To remove the plate, cut the grooves on either side with diagonal cutters.
Then bend the plate back and forth with needle-nose pliers to remove it.
Figure 5-20. Cable punch-out plate. Voice Announce Unit
L
4. Mount the VAU on the wall using the three screws provided with the unit.
(See Figure 5-22.)
5. Connect the extension cable from the DBS 824 to CNl on the VAU.
Note that two inside pins on CNl are port 1. The two pins on either side
are port 2, as shown in Figure 5-21.
Figure S-21. Extension cord connection to the VAU
BK R G Y
CNl on
the bottom
of the VAU
+i@
Port2
s
6. Install the cover on the VAU.
5-26
DBS 824-l O-300 Issued 3/l I95