Panasonic DBS 824 Installation Manual page 139

Third Attendant Position FFl
Third Attendant Position
Software Version: CPC-S and CPC-M, Version 1.0 and higher
Address: FFl 2# 1# 23## (1011699)#
Description
This address assigns a DBS 824 key phone as the third attendant position.
The previous and following addresses (FFI 2# l# 22# and FFl 2#
l# 24#)
can be used to assign second and fourth attendant positions.
When all line appearances at the first attendant are busy, calls will transfer in
sequence to the second, third, and fourth attendants. If all line appearances
are busy on ail attendants, calls will transfer to the Attendant Transfer
Extension (if assigned).
Programming
To assign a third attendant . . .
FFl 2# l# 23# (101 to 699)#
t.
.
Extension Number (10 l-699)
(Default=No third attendant assigned)
To reset the third attendant position to the default value . . .
I
FFl 2# l# 23# CONF ON/OFF
I
Related Programming
Second Attendant Position: FFl 2# l# 22# (lOl-699)##
Fourth Attendant Position: FFl 2# l# 24## (lOl-699)#
Attendant Transfer Extension:' FFl 2# l# 25# (lOl-699)#
Notes
Programming Restrictions When Extensions Are Not Installed. An
.extension must be installed at the port assigned as the third attendant before
the third attendant can be cleared. Likewise, an extension cannot be
programmed as a third attendant unless it is physically assigned.
Page l-28 DBS 824-l O-400
Issued 3/l f95