Auto-Repeat Dialing Count - Panasonic DBS 824 Installation Manual

FFl
Auto-Repeat Dialing Count
Auto-Repeat Dialing Count
Software Version: CPC-S and CPC-M, Version 1.0 and higher
Address: FFl 2# l# 34# (0115)#
Description
This program determines the number of times the DBS 824 will automatically
redial a number (when Auto-Repeat Dialing is activated).
Programming
O=System will not redial.
l=System will redial one time.
2 ,.. 15 = System will rediai this number of
times.
@efau.lt=E)
Related Programming
Wait Trmefor Auto-Repeat Dialing: FRl 3# 26##
Busy
Tone (BT) Detection Timer: FFl 3# 27#
Dial Tone (DT) Detection Timer: FFl 3# 28#
CO Busy Tone (BT) Detection for Auto-Repeat Dialing: FF2 (Trk)# 22#
Notes
Setting
the DBS 824 fo detect BT. The system must be set to monitor the CO
for busy tone (FF2 Trunks 22#), in order to enable the Auto-Repeat Dialing
feature. The system can monitor up to 2 trunk lines at the same time for busy
tone;
if a 3rd trunk has a busy tone at the same time, Auto-Repeat Dialing will
not work.
. .
issued 3/l /95 DBS 824-l O-400 Page l-39