Auto Flash Redial - Panasonic DBS 824 Installation Manual

Auto Flash Redial
FFl
Auto Flash Redial
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address: FFl 2# l# 6#f (0 or l)#
Description
By default, the REDIAL key sends a "flash" before redialing a number.
When the DBS 824 is connected to a PBX, sending a "flash" may place the
line to the PBX on hold; in this case, Auto Flash Redial should be disabled.
Programming
FFl 2# 1# 6## (O*or
l)#
O=REDIAL does not send "flash".
l=REDIAL sends
"flash".
Related Programming
PBX Flash Timer: FFl 3# 16#
Trunk Port Type: FF2 (Trunk)# lO#
Notes
Timing. The CO Line Flash and the Redial Flash features are controlled by
the same timer.
Page l-10
DBS
824-10-400
Issued 3/l/95