Maintenance Data (Serial Port Cn2); Parity Check (Maintenance Port) - Panasonic DBS 824 Installation Manual

FFI
Parity Check (Maintenance Port)
Maintenance Data (Serial Port CN2)
-
Parity Check (Maintenance Port)
Software Version: dPCS and CPC-M, Version 1 .O and higher
Address: FFl 2# 9# l# (0 or l)#
Description
This program determines whether the DBS 824 uses parity checking over
serial port CN2, which is normally dedicated for remote maintenance.
If this address is set to "on" (default setting), use FFl 2# 9# 2# (0
or
1)#
to
select Even or Oaii parity.
Programming
I
1
I
FFl 2# 9## 1# (0 or l)#
1
O=Tums off the parity check.
l=Tums cm the parity check.
1
I
Related Programming
Odd/Even Parity (Maintenance Port): FFl 2# 9# 2# (0 or l)##
Notes
Checking Communications Pamnefm. Be sure to properly set all
communication programming addresses when modifying any single address
value. Communication parameters for Maintenance are set with addresses
FF12# 9## l# through 6#.
Issued 3/l/95
DBS 824-10-400 l-71