Table of Contents
Advertisement
FF5
FF Key Assignments for'Extensions
>
Page
Park Hold
1 Personal Speed Dial
1 Release
t Svstem Sneed Did
Talkback
Trunk Numbers
1 UNA Pickup
Code to be entered in the program address
.
PROG AUTO NNN
XXX or AUTO 00-99#
/
+
Voice mail
pilot number
Password (optional)
Note: If a password is used, it can be from 1 to 3 dig-
its. If the password is over 3 digits, it must be assigned
to a personal or system speed dial number (00-99). Be
sure to include an ending # sign in the speed dial num-
ber if you are accessing a DBS voice mail system.
FF12 oothnlo7
75
AUTO 90 thru 99 (or 900 thru 909) (or 900 thru 939)
cl211
3
I1'11
L
AUTO 00 thru 89 (or 000 thru 089) (or 000 thru 199)
'cl211
2
01 thru 06 (for CPC-S); 01 thru 08 (for CPC-M)
78
Related Programming
FF Key Copy: .FF9 3# (ExtPort)# (ExtPort)##
Notes
Restriction on Trunk LED Indications. Only the first 24 FF keys will light
for trunks that are assigned to them. Trunks can be assigned to the remaining
keys from the phone (rather than through programming mode), but the LEDs
will not light.
Entering Asterisk and Pound Signs. When assigning feature codes in this
address, use FFll and FF12 to enter asterisks ("*") and pound signs ('W').
Pressing FFll enters a "*" in the feature code; pressing FF12 enters a "#."
When you enter these symbols, the display does not indicate that any data was
entered, although the phone will recognize these keys.
. . -
Issued 3/l/95
DBS 824-10-400
5-5
Advertisement
Chapters
Table of Contents
