System Installation Area Code - Panasonic DBS 824 Installation Manual

Digital business system

Hide thumbs Also See for DBS 824:

Table of Contents

System Installation Area Code

Systems Installation

Version: CPC-S and CPC-M, Version 1 .O and

FFl 2# 1# 17# (0 or l)#

This program determines if the DBS 824 system's location requires a "1" to

be dialed before the area code to make long-distance calls. This setting will

affect the way the 824 system handles Toll Restriction (TRS) and Least Cost

Routing (LCR) for long-distance calls.

In almost all cases, the default setting ("1" must be dialed) should not be

17# (Oor l)#

O="l" is not required before a long-distance call.

must be dialed before a long-distance call.

Znteracfiori

and &CR. If "0" is selected above (L' 1" is not required

before a long-distance call), the system will look at the first three digits of the

number dialed, whether it's a "1" or not. This would severely limit the

capability of 'IRS and LCR, which are based on 3-di.@t area codes.

If "1" is selected ("1"

required before dialing a long-distance call), the

system will ignore the first dialed digit (could be "0" or "1") and look at the

next three digits dialed as the area code.

Toll Restrictions:

Least Cost Routing: FF8

DBS 824-l O-400

Issued 3/l /95

Chapters

Table of Contents