Table of Contents
Advertisement
DISA Start Time
FF2
DISA Start Time
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address:
FF2 (Trunk)# 19# (HHMM)#
Description
Programming
Use this address to program a DISA trunk to begin DISA operation at a
specified time each day. Trunks are enabled for DISA using the DISA Auto
Answer address @F2 Trunks 1 l#>. Use this DISA Start Time address, and
the DISA End Time address following, to limit DISA operation on a trunk to
a certain time period each day.
To set the DISA start time . . .
Enter the time using the 24-hour format. The following example sets the time
to 3: 15
D.rn.
FF2 (l-6
or
l-8)#
19# (1515)#
I
Trunk Number:
CPC-S: l-6
CPC-M: 1-8
Time Setting
(24-hour foxmat)
To clear the DISA start time . . .
FF2
(l-6
or
l-8)#
19#
CONF ON/OFF
Related Programming
Time Setting: FFl l# 2# (HI-IMM)#
DISA Inbound Call ID Code: FFl 5# (0000-9999)#
DISA Outbound Call ID Code 1: FFl 6## l# (0000-9999)#
DISA Outbound Call ID Code 2: FFl 6# 2# (0000-9999)##
DISA Auto Answer:
FF2 (Trunk)# ll# (0 or l)#
DISA End Time: FF2 (Trunk)# 20# (HHMM)##
Notes
DZSA Operation With Default Setting. If DISA start time is not set in this
address (left at default ****),
DISA operation will be on all the time.
Caller ID Automatic DZSA. This DISA Start Time setting does not affect
Automatic MSA operation with Caller ID (FFl 2# 8# l-lO# PhoneNo.#).
2-16
DBS
824-10-400
Issued 3/l/95
Advertisement
Chapters
Table of Contents
