Table of Contents
Advertisement
CO Flash Timer
FFl
CO Flash Timer
Software Version: CPC-S and CPC-M, Version 1.0 and higher
Address:
FFl 3## ll# (0115)#
Description
In the DBS 824 system, a phone user can press the FLASH key to disconnect
from and then reseize a CO loop-start trunk (this operation is called a
"flash"). Pressing the REDIAL key also performs a flash before
automatically redialing a phone number.
This CO Flash Timer determines how long a flash to a CO will last if the
FLASH key or the REDIAL key is depressed (pressed and then released).
Exception: If the FLASH key is pressed
and held down,
the flash signal will
last as long as the key is pressed. (The flash generated by pressing REDLAL
is always controlled by the CO Flash Tier,
regardless of how long REDIAL
is held down.)
Programming
FFl 3#
ll#
(O$)#
+
Timer .Setting (Default=9;
see the following table)
NOTE:
Timer settings 11
to 15 require a
208 Expansion Card (Part No. VB-4265
1).
Table I-16. CO flcrsh timer values
l-90
DBS 824-10-400
lssueb 3/l/95
Advertisement
Chapters
Table of Contents
