Outbound DTMF Signal Duration for Auto-Dialed Digits
FF2
Outbound
DTMF Signal Duration for Auto-Dialed
Dig-its
.
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address:
FF2 (Trunk)# 15# (l-3)#
Description
This program controls DTMF signal duration when digits are dialed by the
system rather than the user. Examples of system dialing include Redial,
Saved Number Redial, Speed Dialing, and LCR Digit Addition.
Programming
FF2 (l-6 or l-8)# 15## (l-3)#
f
Trunk Number:
1=75 ms on/50 ms
off
CPC-S: 1-6
2=125 ms on/125 ms off
CPC-M: 1-8
3=250 ms on/250 ms off
DBS 824-l O-400
Issued 3/l 195