Cruise Control
Cruise Control Main Switch Test/Replacement
1999-2001 models
1. Carefully pry the switch (A) out of the instrument
panel.
2. Disconnect the 5P connector (B) from the switch.
3. Check for continuity between the terminals in each
switch position according to the table.
• If the continuity is not specified, replace the
illumination bulbs or the switch.
• If OK, install the switch
Terminal
Position
OFF
ON
4-50
4-50
Terminal side of
male terminals
A
B
2
1
3
4
5
2002-2004 models
1. Carefully pry the switch (A) out of the instrument
panel.
2. Disconnect the 8P connector (B) from the switch.
3. Check for continuity between the terminals in each
switch position according to the table. If there is no
continuity, replace the illumination bulbs (C) or the
switch.
Terminal
Position
OFF
ON
A
C
B
4
7
5
1
2