Timing Belt Adjuster Replacement; Timing Belt Drive Pulley Replacement - Honda 2004 Odyssey Service Manual

Timing Belt Adjuster Replacement

1. Remove the timing belt (see page 6-20).
2. Remove the auto-tensioner.
3. Remove the bolt (A), then remove the timing belt
adjuster (B) and collar (C).
A
25 N·m (2.6 kgf·m, 19 lbf·ft)
4. Install in the auto-tensioner.
5. Install the timing belt (see page 6-23).
Timing Belt Drive Pulley
Replacement
1. Remove the timing belt (see page 6-20).
2. Remove the crankshaft position (CKP) sensor (see
page 6-61).
3. Remove the timing belt drive pulley.
C
B
4. Check the timing belt drive pulley for damage. If the
timing belt drive pulley is damaged, replace the
timing belt drive pulley.
5. Install the new timing belt drive pulley.
6. Install the CKP sensor (see page 6-61).
7. Install the timing belt (see page 6-23).
6-33 6-33