Honda 2004 Odyssey Service Manual page 163

Engine Assembly
Engine Installation (cont'd)
31. Install the starter cable (A) and harness clamp (B).
B
32. Install the alternator-compressor belt.
33. Loosely install the P/S pump and P/S pump belt.
34. Adjust the P/S pump belt (see step 3 on page 17-12).
35. Install the battery cable (A) on the under-hood fuse/
relay box, then install the harness clamps (B).
5-18
A
8 x 1.25 mm
9 N·m (0.9 kgf·m,
7 lbf·ft)
A
B
36. Push in the powertrain control module (PCM)
connectors. Install the grommet (A), then tighten
the grommet mounting nuts (B).
B
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
A
37. Install the harness clamps (C).
38. Connect the PCM connectors.
C