How To Install; How To Start And Finish - Canon imageFORMULA P-215 Service Manual

2. How to Install

Procedure to install service tool: Never
install it in the user's computer.
1) Turn ON the computer for servicing to start
OS (Windows).
2) Install the setup disc (DVD) supplied with
this machine.
3) An installation screen for the user is dis-
played, but ignore this, right-click the
[Start] button, and select "Explorer".
4) Open the folder "\Driver\Tools" in the
setup disc. Copy the "P215Tool.exe" file in
the folder on any drive of the computer for
servicing.
Note: If the Auto Start switch is set to "OFF",
install the driver for this machine and
also install the CaptureOnTouch as
necessary. Please refer to the "User
Manual" on installation of them.
However, when checking a specifica-
tion such as the scanning speed, the
system requirements for a computer
described in the "User Manual" should
be satisfied.
Note: Keep the name of the folder and the
password confidential from the user.
COPYRIGHT © CANON ELECTRONICS INC. 2011

3. How to Start and Finish

How to start
1) Start the computer for serving.
2) If an icon of CaptureOnTouch is displayed
on the task bar, click the icon to terminate
it.
Note: Refer to the "User Manual" for the
details of how to operate CaptureOn-
Touch.
3) Set the Auto Start switch to "OFF".
Note: If it is "ON", the service tool does not
start.
4) Connect the machine to the computer for
servicing use with a USB cable. And then
open the feed tray.
5) Start the installed file "P215Tool.exe".
CANON P-215 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
Figure 5-202
5-3