Service Mode; Outline; Ii. Service Mode - Canon imageFORMULA P-215 Service Manual

CHAPTER 5 TROUBLESHOOTING

II. SERVICE MODE

1. Outline

To execute the service mode, install the
software (service tool) for the service mode,
which is stored in the supplied setup disc in
the computer for servicing. However, it is not
an integration type, but a type that uses a
dedicated EXE file. This software supports
only the Windows operating system.
The system requirements for the com-
puter are equivalent to those indicated in the
"User Manual".
The service screen is shown below.
Figure 5-201
5-2
to select each specified mode. Each service
mode starts from this screen. And product
name, version, serial number, and the total
scanning count are displayed.
No.
1
2
3
4
5
6
7
8
9
COPYRIGHT © CANON ELECTRONICS INC. 2011
On the service screen, there are buttons
A list of the modes is show below.
Button displayed/description
All Adjustment
Perform No. 2 to 4 below for image
reading.
Registration Adjustment[Auto]
Performs the registration adjust-
ment.
Light Adjustment
Performs fine adjustments to the
shading correction value.
Regist sensor adjustment
Fixes the initial value of the amount
of light received of the regist sensor.
Firm Load
Changes the firmware.
About
Displays the version of the service
mode.
Dcon Check
Checks operations of the hardware
inside of the machine, such as an
operation key, sensor, and motor.
Check Device
Displays the internal version of the
device. Reset the serial number.
Counter
Display and reset the total scanning
count and the number of document
jams, and reset the roller counter.
Table 5-201
CANON P-215 FIRST EDITION