Install The Software - Canon CanoScan 8400F Quick Start Manual

Install the Software (Windows)
Install the Software
WindoY#s
This wizard helps you installsoflware for:
\l!hat do you want the wizard to do?
:, ',') If your hardware came with an installation CO
''--1t;;:;' or floppy disk.. inseltit now,
Welcome to the Found New
Hardware Wizard
The ScanGear CS scanner drfver (TWAIN Driver) will be
installed.
1
Turn the computer on.
2
Place the CanoScan Setup Utility CD-ROM in the drive.
The CanoScan Setup Utility main menu will display.
3
Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.
The [Install] window will display.
4
Click [Start Installation].
You will install six software programs and the Scanning Guide
(HTML format manual).
5
The installation procedure will start.
Follow the on-screen message prompts and click [Next] or [Yes]
to continue the installation.
6
When the installation is complete, click [Yes].
The computer will restart.
7
After Windows restarts, remove the CD-ROM from
the drive and store it in a safe place.
+
Continue on P. 5.
\'ielcome to the Reader 5.0 Setup program. This
program will install Reader 5.0 on your computer.
It is strongly recommended that you exit all Windows programs
before running this Setup program.
Click Cancel to quit Setup and then close any programs you
have running. Click Next to continue with the Setup program.
WARNING: This program is protected by copyright law and
international treaties.
Unauthorized reproduction or distribution of this program. or any
portion of it, may result in severe civil and criminal penalties. and
will be prosecuted to the maximum extent possible under law.