External Parts; Bottom Cover; Right Cover - Canon imageFORMULA P-215 Service Manual

I. EXTERNAL PARTS

1. Bottom Cover

1) Remove 3 screws
M2.5x6) and remove the bottom cover
Note: When the bottom cover is removed, the
light guide for cards is also removed.
Figure 3-101
COPYRIGHT © CANON ELECTRONICS INC. 2011
1 (self-tapping, FH
2 .
CANON P-215 FIRST EDITION
CHAPTER 3 DISASSEMBLY & ASSEMBLY

2. Right Cover

1) Remove the bottom cover.
(Page 3-1)
2) Insert a tool with thin and flat tip into the
upper and lower holes
and pick the edge of the cover to remove
the fitting parts, then remove the right
cover .
2
Note: Be sure to insert the tool into the correct
positions. Since the hole marked
hidden and its edge tends to be de-
formed, remove it lastly carefully.
Since the right cover may jump out,
remove it while holding it by hand.
The pickup tray unit and inside gears
can be removed when the right cover is
removed.
Figure 3-102
1 (2 holes each),
is
3-1