Maintenance; User Maintenance - Canon imageFORMULA P-215 Service Manual

III. MAINTENANCE

1. User Maintenance

Refer to the "User Manual" for the de-
tails.
1) List
No. Location/Parts
1 Main body
2 Feed path
3 Reading glass
4 Separation pad
5 Feed roller
6 Other rollers
2) Locations to be cleaned
COPYRIGHT © CANON ELECTRONICS INC. 2011
Maintenance Cycle
As
necessary
Table 4-301
Feed roller
Reading glass
Separation pad
Rollers
Figure 4-301
CANON P-215 FIRST EDITION
CHAPTER 4 INSTALLATION & MAINTENANCE
Other
Use a cloth slightly dampened with
water and well wrung out to remove
any dirt, and then use a soft, clean,
dry cloth to wipe the main body.
Use such as air blowers to remove
any dust and paper particles that
have accumulated on the feed path.
Use a soft, clean, and dry cloth to
wipe off any dirt.
Use a cloth slightly dampened with
water and well wrung out to remove
10,000
any dirt, and then use a clean, dry
sheets
cloth to wipe the main body.
Note: Remove the feed roller from
100,000
the main body before cleaning.
sheets
[ : Cleaning, : Replace]
Description
4-5