Consumable Parts - Canon imageFORMULA P-215 Service Manual

CHAPTER 4 INSTALLATION & MAINTENANCE

2. Consumable Parts

This section
messages and how to reset the counter.
However, the operating system should be
Windows. For details, refer to the "User
Manual".
Replacement messages
If the number of sheets fed exceeds an
expected life, a message appears when the
scanner is connected to the computer.
1) Feed roller: 100,000 sheets
Figure 4-302
2) Separation pad: 10,000 sheets
Figure 4-303
4-6
describes replacement
COPYRIGHT © CANON ELECTRONICS INC. 2011
Resetting the Counters
When the feed roller or separation pad
was replaced, clear the counter recorded in
the scanner.
The method is different if the Auto Start
switch is "ON" and if it is "OFF". It is also
possible in service mode.
a. Auto Start switch "ON"
1) Click the CaptureOnTouch Lite icon on the
taskbar. A menu screen is displayed. Se-
lect "Environmental settings".
Figure 4-304
2) The "Maintenance" tab is displayed. Click
the corresponding "Reset" button.
Figure 4-305
CANON P-215 FIRST EDITION