Logging On; Setting The Database With View; Figure 15-6 The View Logon Window - Honeywell Rapid Eye Administrator's Manual

Logging On

TIP!

Setting the Database with View

Leave this
checkbox empty
on a mobile PC
Document 800-02953V4 Rev A
03/10
Examples
acceptable
d:> remadmin.exe "O'Donnell #4"
d:> remadmin.exe ODonnell4
error
d:> remadmin.exe O'Donnell #4
Distribute the *.mdb file to the View operator. The user needs to copy the file to the
3.
folder holding the View.exe file.
For Routine Use of Admin
After specifying a database, Admin and View will continue to use it, each time that you log
on. Logging on to Admin is a simple matter of starting Admin and clicking OK (as explained
in Starting Admin on page 264).
To log on to Admin, use either:
a. The Administrator account, or
b. An account in which user rights and site access are based on the Administrator.
The First Use Exception
On first use, you are offered an empty, default Multi database. To obtain a Multi central
database, see Obtaining a Multi Database
Figure 15-6 The View Logon Window
Rapid Eye Multi-Media DVR System Administrator Guide
(double-quotes are needed)
on page 264.
275