Using Another Multi Database; Figure 15-2 Specifying The Multi Database - Honeywell Rapid Eye Administrator's Manual

Multi Database

Using Another Multi Database

266
1. Launch Admin (or View). The Logon window appears.
2. In the Central Database section, leave or switch the database (Access or SQL server)
by clicking its button. Enter the name of the Multi db that you need.
3. Enter an user account name in the User ID field. The account name must be part of
the Multi database selected in the previous step.
4. Enter the password to the account in the Password field. Click OK.
Figure 15-2 Specifying the Multi Database
Caution Take care when entering the name of a database in the Admin logon window.
Entering the name of a non-existent database starts the Admin database
tool. See Creating a Multi Database
Note Once you have set Admin to use a Multi central database (Multi db), the same
Multi db is used every time that you log on.
Converting a Multi Database from SQL to Access
A SQL server database can hold many more alarms than an MS-Access database. To
convert a SQL database to an Access format, Honeywell recommends removing alarm data
from the SQL database beforehand.
To switch to another
Multi database,
change the central
database (Multi db)
name.
on page 267.