Correcting The Clock; Securing A Site - Honeywell Rapid Eye Administrator's Manual

Multi-media digital video recorder
Hide thumbs Also See for Rapid Eye:
Table of Contents

Advertisement

Correcting the Clock

Securing a Site

Document 800-02953V4 Rev A
03/10
Whole Hours: Time Reference
Check the Time Reference setting. If the clock of a unit in another time zone shows a time
that is off by whole hours, the clock could be set to the correct time, but is using an optional
display (GMT, operator's time zone, unit's time zone). Refer to the Selecting a Time
Reference in
Rapid Eye™ Multi-Media Digital Video Recorder Remote View Operator
Whole Hours: Time Zone
Check the Time Zone setting. If the clock of a unit in another time zone shows a time that
is off by whole hours, the clock could be set to the correct time, but is set to an incorrect
time zone. See
Unit Time Zone and Clock
Setting the Clock to the Correct Time
A short span of incorrect time. If a unit's clock shows the wrong time (more than +/- a few
seconds) for a short time period (a few seconds, a few minutes, up to an hour), you need
to reset the clock correctly; either automatically or manually.
A Follow-Up May Be Needed: Clearing Storage
If the clock remains set to an incorrect time (more than +/- a few seconds) for a
considerable length of time (many hours, days or weeks) it can become inconvenient and
confusing for an operator who needs to play through that recorded video. For such an error:
Set the clock correctly; either automatically or manually.
Consider
Clearing
Storage, page 141.
Securing the Multi System
After
Making a Site
Operational, page 63, Honeywell recommends that you secure your
Rapid Eye site by adding:
A system password. Use Admin to set a system password to protect your sites from
unauthorized accounts. See
- and -
A password for the Administrator account. Used to help prevent uncontrolled
configuration of Multi-Media units, accidental clearing of a unit's storage, or unwanted
removal of the system password. See
Rapid Eye Multi-Media DVR System Administrator Guide
on page 64.
System Password
on page 184.
Administrator Password
Guide.
on page 195.
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents