Resolution Of Live Video In View Software; Other Video Settings - Honeywell Rapid Eye Administrator's Manual

Resolution of Live Video in View Software

TIP!

Other Video Settings

Document 800-02953V4 Rev A
03/10
Automatic Optimization of Resolution for Live Video Sessions
View software optimizes the resolution of live video. The size of a camera window
determines which resolution is used. As an operator makes a camera window larger (or
smaller), the resolution of images is automatically adjusted for an optimal view of the video
feed. See the Rapid Eye™ Multi-Media Digital Video Recorder Remote View Operator
for more procedures and tips about live video.
The resolution of recorded video is setup in a
change when View software automatically optimizes the resolution of live video.
Smoothing Video
Video smoothing is an option of the View application, set by the View operator. It adds a
load to the operator's CPU and can slow busy systems. The result of video smoothing is
not recorded; it can be toggled OFF/ON while monitoring recorded or live video. In a
Maintenance Session, video smoothing can be seen in the Enhanced Preview window. See
The Enhanced Preview of Resolution
Digital Video Recorder Remote View Operator
Note The resolution and quality of video displayed by the Remote View application
can also be affected by the available bandwidth of the network the unit is
installed in. See
your system for high or low bandwidth.
It is also possible to disable LocalView to improve system performance. If
LocalView is not used in your system, see
Monitoring on page
Color
You have the option of specifying if a color video feed is viewed in color or in black and
white (b&w). Removing the checkmark from the Color box on the Video tab shows the
video feed in b&w (see Figure 5-1
toggled on/off, as needed.
Recording Settings
Use the Recording tab to setup the Continuous video recording settings. The values are
reported in Recording Settings on the Video tab. See
Recording Settings on page 78. See
(PTZ) Setup, page 95, and
Rapid Eye Multi-Media DVR System Administrator Guide
Maintenance Session
on page 85. See also the
Guide.
Setting a Bandwidth Throughput Option
149 to disable LocalView.
on page 75). Color continues to be recorded and can be
Motion Detection
Using a PTZ Camera on page 98.
and does not
Rapid Eye™ Multi-Media
on page 149
Enabling or Disabling Local
Recording Video with Continuous
on page 127. See Pan, Tilt, and Zoom
Guide,
to setup
77