Cisco FastHub 100 series Installation Manual page 74

rpsappb Page 12 Monday, September 14, 1998 8:19 AM
Reading Error Messages on Cisco 2600 and 3600 Series Routers
Table B-2 Error Descriptions and LED Status (Continued)
RPS LED Status Condition
B-12 Cisco Redundant Power System Hardware Installation Guide
Error Indicators, Descriptions, and Solutions
SNMP Trap Issued Upon Error:
ciscoEnvMonRedundantSupplyNotification is generated. The varbinds
included are ciscoEnvMonSupplyStatusDescr and
ciscoEnvMonSupplyState. The value of ciscoEnvMonSupplyState will be
critical.
How to Correct Error:
Check the LEDs on the front panel of the Cisco RPS to determine the
types of failures that have occurred. Go to the section describing each
failure type for instructions on how to correct it.
If the error message persists, the Cisco RPS needs to be replaced.
Console Message Issued Upon Correction of Error:
When an external device console screen displays the Cisco IOS software
prompt (routername > or routername #)
is now normal."
When an external device console screen displays the ROMMON prompt
(rommon #>) no console message is issued when the error is corrected.
SNMP Trap Issued Upon Correction of Error:
ciscoEnvMonRedundantSupplyNotification is generated. The varbinds
included are ciscoEnvMonSupplyStatusDescr and
ciscoEnvMonSupplyState. The value of ciscoEnvMonSupplyState will be
normal.
"Redundant power system