Cisco FastHub 100 series Installation Manual page 32

rps3 Page 2 Monday, September 14, 1998 8:17 AM
Cables
Cables
The Cisco RPS ships in either of the following configurations:
•
With four cables of one-to-one configuration (22-pin to 18-pin) for quasi-redundant
powering of up to four external devices (Cisco RPS number PWR600-AC-RPS-CAB).
•
Without cables (Cisco RPS number PWR600-AC-RPS-NCAB) for fully redundant
powering of up to two external devices. If you want a fully redundant power source, you
will need to order Y-shaped two-to-one cables separately.
Figure 3-1 and Figure 3-2 show the cables you can order, and Table 3-1 lists the
corresponding product order numbers. For ordering information, Contact Cisco Customer
Service at 800 553-6387 or 408 526-7209. See also the section "Cisco Connection Online,"
in the "About This Guide" preface.
3-2 Cisco Redundant Power System Hardware Installation Guide