Mounting The Chassis In A Rack - Cisco FastHub 100 series Installation Manual

rps2 Page 8 Monday, September 14, 1998 8:17 AM
Rack-Mounting the Cisco RPS

Mounting the Chassis in a Rack

After the brackets are secured to the chassis, use your own screws to attach the chassis to
the rack, as shown in Figure 2-6.
Figure 2-6
DC OUTP UT 3
Note: The second bracket attaches to the rack at the other side of the chassis.
2-8 Cisco Redundant Power System Hardware Installation Guide
Attaching the Chassis to a Rack—Rear Panel Forward
DC OUTP UT 4