Cisco FastHub 100 series Installation Manual page 21

rps1 Page 13 Monday, September 14, 1998 8:17 AM
Warning
protection. Make sure that a fuse or circuit breaker is no larger than 120 VAC, 15A U.S.
(240 VAC, 10A international) is used on the phase conductors (all current-carrying
conductors).
Warning
to earth ground during normal use.
•
Look carefully for possible hazards in your work area, such as moist floors, ungrounded
power extension cables, and missing safety grounds.
•
If an electrical accident occurs, proceed as follows:
— Use caution; do not become a victim yourself.
— Turn off power to the Cisco RPS.
— If possible, send another person to get medical aid. Otherwise, determine the
— Determine if the person needs rescue breathing or external cardiac compressions;
Warning
laws and regulations.
This product relies on the building's installation for short-circuit (overcurrent)
This equipment is intended to be grounded. Make sure that the host is connected
condition of the victim and then call for help.
then take appropriate action.
Ultimate disposal of this product should be handled according to all national
Safety with Electricity
Overview of the Cisco RPS 1-13