Cisco FastHub 100 series Installation Manual page 18

rps1 Page 10 Monday, September 14, 1998 8:17 AM
Features
Features
The following features are standard:
•
Two AC input power cords
•
Two fully redundant AC input power modules
•
Four 150W DC output power modules
•
Four one-to-one cables (PWR600-AC-RPS-CAB)
•
Rack-mountable chassis (19-inch rack-mount brackets included)
•
Redundant cooling fans
•
LEDs for the AC and DC fans and temperature status
•
Simple Network Management Protocol (SNMP) support of error messages for
Cisco 2600 and Cisco 3600 series routers.
There is no SNMP support for error messages in the FastHub series 100,
FastHub series 200, FastHub series 300, Catalyst 1900 series, Catalyst 2820 series,
Catalyst 2900 XL switches, Cisco 2500 and 4000 series routers, and the Cisco MC3810
multiservice concentrator.
Optional Y-cables (for use with the PWR600-AC-RPS-NCAB—the Cisco RPS
Note
which ships with no cables) can be ordered separately. For ordering information, Contact
Cisco Customer Service at 800 553-6387 or 408 526-7209. See also the section "Cisco
Connection Online," in the "About This Guide" preface.
1-10 Cisco Redundant Power System Hardware Installation Guide