Cisco FastHub 100 series Installation Manual page 23

rps2 Page 1 Monday, September 14, 1998 8:17 AM
Installing the Cisco RPS
You can set the Cisco RPS chassis on a desktop or install it in a rack.
Warning
equipment.
Warning
lightning activity.
Warning
contact with telephone-network voltages.
Warning
earth ground during normal use.
Warning
suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available.
Warning
disconnected last.
•
Do not work alone if potentially hazardous conditions exist.
•
Never assume that power is disconnected from a circuit. Always check.
Only trained and qualified personnel should be allowed to install or replace this
Do not work on the system or connect or disconnect cables during periods of
Before opening the chassis, disconnect the telephone-network cables to avoid
This equipment is intended to be grounded. Ensure that the host is connected to
Never defeat the ground conductor or operate the equipment in the absence of a
When installing the unit, the ground connection must always be made first and
2
C H A P T E R
Installing the Cisco RPS 2-1