Cisco FastHub 100 series Installation Manual page 72

rpsappb Page 10 Monday, September 14, 1998 8:19 AM
Reading Error Messages on Cisco 2600 and 3600 Series Routers
Table B-2 Error Descriptions and LED Status (Continued)
RPS LED Status Condition
TEMP LED is amber.
B-10 Cisco Redundant Power System Hardware Installation Guide
Error Indicators, Descriptions, and Solutions
Console Message Issued Upon Correction of Error:
When an external device console screen displays the Cisco IOS software
prompt (routername > or routername #)
THERMAL condition is now normal"
When an external device console screen displays the ROMMON prompt
(rommon #>) no console message is issued when the error is corrected.
SNMP Trap Issued Upon Correction of Error:
ciscoEnvMonRedundantSupplyNotification is generated. The varbinds
included are ciscoEnvMonSupplyStatusDescr and
ciscoEnvMonSupplyState. The value of ciscoEnvMonSupplyState will be
normal.
Console Error Message:
When an external device console screen displays the Cisco IOS software
prompt (routername > or routername #)
Redundant Power Supply THERMAL FAIL condition."
The Cisco IOS software checks the condition once every 30 seconds. If
the condition still exists, the error message redisplays.
When an external device console screen displays the ROMMON prompt
(rommon #>)
"*** System Environmental Interrupt ***
WARNING: REDUNDANT POWER SUPPLY THERMAL BIT IS
ASSERTED."
Description of Error:
The temperature inside the Cisco RPS is too hot.
SNMP Trap Issued Upon Error:
ciscoEnvMonRedundantSupplyNotification is generated. The varbinds
included are ciscoEnvMonSupplyStatusDescr and
ciscoEnvMonSupplyState. The value of ciscoEnvMonSupplyState will be
a warning.
"Redundant Power Supply
"System detected