Download Print this page

Makita BLS712SF Instruction Manual page 9

190 mm (7-1/2") cordless slide compound saw equipped with electric brake and high capacity battery charger

Advertisement

Cooling system
This charger is equipped with cooling fan for heated battery in order to enable the battery
to prove its own performance. Sound of cooling air comes out during cooling, which
means not trouble on the charger.
Yellow light will flash for warning in the following cases.
Trouble on cooling fan
Incomplete cool down of battery, such
as,
being clogged with dust
The battery can be charged in spite of the yellow warning light. But the charging time will
be longer than usual in this case.
Check the sound of cooing fan, vent on the charger and battery, which can be sometime
clogged with dust.
The cooling system is in order although no sound of cooling fan comes out, if the yellow
warning light will not flash.
Always keep clean the vent on charger and battery for cooling.
The products should be sent to repair or maintenance, if the yellow warning light will
frequently flash.
Conditioning charge
Conditioning charge can extend the life of battery by automatically searching the optimum
charging condition for the batteries in every situations.
The battery employed in the following conditions repeatedly, will be worn out shortly, and
yellow warning light may flash.
1. Recharge of battery with its high temperature
2 . Recharge of battery with its low temperature
3.
Recharge of full charged battery
4. Over-discharge of battery (continue to discharge battery in spite of down of power.)
5. Recharge under broken cooling system
The charging time of such battery is longer than usual.
CAUTION:
*The high capacity battery charger Model DC24SA is for charging Makita battery cartridge.
Never use it for other purposes or for other manufacturer's batteries.
When you charge a new battery cartridge or a battery cartridge which has not been used
for
a
long period of time, it may not accept a full charge. This is a normal condition and
does not indicate a problem. You can recharge the battery cartridge fully after
discharging
it completely and recharging a couple of times.
If you charge a battery cartridge from a just-operated tool or a battery cartridge which has
been left in a location exposed to direct sunlight or heat for a long time, the charging light
may flash in red color. If this occurs, wait for a while. When the temperature on battery is
more than approx. 70°C. two charging lights may flash in red color, and when approx.
50°C
-
70°C, one charging light in red color. Charging will begin after the battery cartridge
is cooled by the cooling fan installed in the charger.
9

Advertisement

loading

This manual is also suitable for:

Bls712sfeBls712shBls712she