Download Print this page

Makita BLS712SF Instruction Manual page 8

190 mm (7-1/2") cordless slide compound saw equipped with electric brake and high capacity battery charger

Advertisement

Installing or removing battery cartridge
*Always switch off the tool before inser-
tion or removal of the battery cartridge.
*To remove the battery cartridge, with-
draw it from the tool while sliding the
button on the side of the cartridge.
*To insert the battery cartridge, align the
tongue on the battery cartridge with the
groove in the housing and slip
it
into
place. Always insert it all the way until it
locks in place with a little click.
If
you can
see the red Dart on the upper side on the
.
Battery
cartridge
button, it is not locked completely. Insert it fully unti the red part cannot be seen. If not, it
may accidentally fall out
of
the tool, causing injury to you or someone around you.
Do
not use force when inserting the battery cartridge. If the cartridge does not slide in
easily, it is not being inserted correctly.
Charging
Your new battery cartridge is not charged.
You will need to charge it before use. Use
the high capacity battery charger Model
DC24SA to charge the battery cartridge.
Plug the high capacity battery charger
into the proper
N C
voltage source. Two
charging lights will flash in green color
repeatedly.
Insert the battery cartridge into charger
until it stops adjusting to the guide of
charger. Terminal cover of charger can be
opened with inserting and closed with
pulling out the battery cartridge.
Terminal cover
I
When the battery cartridge is inserted, the charging light color will change from green to
One red charging light indicates charged condition in 0
-
80% and two red ones indicates
*When charging is completed, the charging lights will change from two red ones to two
The charging time is as follows:
red and charging will begin. The charging light will remain lit steadily during charging.
80
-
100%.
green ones.
Battery 8241 7: approx. 30 minutes
Battery 82430: approx. 60 minutes
If you leave the battery cartridge in the charger after the charging cycle is complete, the
charger will switch into its "trickle charge (maintenance charge)" mode which will last
approximately 24 hours.
*After charging, unplug the charger from the power source.
8

Advertisement

loading

This manual is also suitable for:

Bls712sfeBls712shBls712she