Advertisement
Positioning for adjusting the miter angle
The turn base turns up to 47" to the left
and 57" to the right. Loosen the grip by
turning counterclockwise. Turn the turn
base while pressing down the lock lever.
When you have moved the grip to the posi-
tion where the pointer points to the
desired angle on the miter scale, securely
tighten the grip clockwise.
I
Miter scale
Turn base
Lock lever
CAUTION:
*When turning the turn base, be sure to raise the handle fully.
*After changing the miter angle, always secure the turn base by tightening the grip firmly.
Positioning for adjusting the bevel angle
The saw blade tilts up to 45" to the left. To adjust the bevel angle, loosen the lever at the
rear
of
the tool. Push the handle to the left to tilt the saw blade until the pointer points to
the desired angle on the bevel scale. Tighten the lever to secure the arm.
I
Lever
CAUTION:
When tilting the saw blade, be sure to raise the handle fully.
*After changing the bevel angle, always secure the arm
by
tightening the lever
Securing workpiece
WARNING:
It is extremely important
to
always secure the workpiece properly and tightly with the
vise. Failure to do so can cause the tool to be damaged and/or the workpiece to be
destroyed. PERSONAL INJURY MAY ALSO RESULT. Also, after a cutting operation, DO
NOT raise the blade until the blade has come to a complete stop.
16
Advertisement
