Advertisement
16.
REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is
in
off position before inserting battery.
17. USE RECOMMENDED ACCESSORIES. Consult the owner's manual for
recommended accessories. The use of improper accessories may cause risk
of injury t o persons.
18.
NEVER STAND ON TOOL. Serious injury could occur i f the tool is tipped or
i f the cutting tool is unintentionally contacted.
19.
CHECK DAMAGED PARTS. Before further use of the tool, a guard or other
part that i s damaged should be carefully checked t o determine that it
will
operate properly and perform i t s intended function
-
check for alignment
of moving parts, binding of moving parts, breakage of parts, mounting, and
any other conditions that may affect i t s operation. A guard or other part that
is damaged should be properly repaired or replaced.
20.
DIRECTION
OF
FEED. Feed work into a blade or cutter against the direction
of rotation of the blade or cutter only.
21.
NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don't
leave tool until it comes t o a complete stop.
4
Advertisement
