Connecting The Coffee Machine To The Mains Water Supply - Baumatic PECM1SS Instruction Manual

Connecting the coffee machine to the mains water supply

Your coffee machine can be permanently connected to your mains
water supply. IMPORTANT: Your coffee machine will not come
supplied with an inlet hose; you should purchase an inlet hose that is
suitable for providing water that is going to be drunk.
3. You must make sure that you depress the water filling switch to
activate the water filling mechanism. The switch is to the right of
the water inlet connection. The section of the switch with I on it,
should be pressed down.
4. When you are lifting the coffee machine into the housing, you
should feed the inlet hose through a hole that you have made in
the housing cabinet.
5. Connect the other end of the inlet hose to your
6. Switch on the water tap and test for any leaks.
1. Identify the inlet hose
2. Connect the inlet hose to the inlet hose
connection at the rear of the appliance.
You should make sure this is securely
tightened.
mains water supply. It must be connected to a tap
than dispensed drinkable water. Tighten the inlet
hose to your mains supply fully, but do not over
tighten as this may distort the filter that sits in the
end of the inlet hose.
connection at the rear of the
coffee machine. The position of
the connection is indicated by
the arrow in the picture
opposite.
30