Fully automatic built in coffee machine (40 pages)
Summary of Contents for Baumatic PECM1SS
Page 1
PECM1SS Semi-automatic built in espresso maker...
Page 2
User Manual for your Baumatic PECM1SS Semi-automatic built-in espresso maker NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference; for you or any person not familiar with the operation of the appliance.
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment.
Baumatic’s Conditions Of Guarantee. The foregoing does not affect your statutory rights. o Repairs may only be carried out by Baumatic service engineers or their authorised service agent. Warning and safety instructions o This appliance complies with all current European safety legislation.
Page 6
Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time. o If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under close supervision at all times.
o The manufacturer declares that the espresso maker is built using certified materials and requires the appliance to be installed in accordance with the standards currently in force. This appliance must be used by a trained person for domestic purposes only. Specifications Product Dimensions Aperture Dimensions...
o Removable water tank (capacity 1.8 litres) o Empty water tank warning light o LED high density illumination Standard accessories o Filter holder o 1 x one measure espresso cup filter o 1 x two measure espresso cup filter o 2 x espresso cups with saucers o Water softener Technical specifications o Coffee pump pressure 15 bar...
Description of the espresso maker Standard accessories Filter holder Spout for a single coffee dose Spout for a double coffee dose Filter for 1 Italian coffee pod or 1 dose of ground coffee Filter for 2 doses of espresso coffee or 1 French coffee pod Espresso coffee batcher (ground) Coffee pressing tool Water softener filter for the reservoir...
Filter holder ring nut Power ON/OFF switch Light Control panel 22) Power ON indicator (green) 23) Main boiler status indicator (green) 24) Main boiler dispensing indicator (green) 25) Steam boiler status indicator (green) 26) Steam dispensing indicator (green) 27) Boiling water dispensing indicator (green) 28) Low water level indicator (red) 29) Main boiler activation button 30) Main boiler dispensing button...
The filters o Filter for 1 Italian coffee pod or 1 dose of ground coffee. o Filter for 2 measures of espresso coffee of 1 French coffee pod. Things to do before first use 1) Cleaning o It is strongly recommended to clean the appliance prior to its first use.
o Install the appliance as per the installation instructions contained within this booklet. o Open the water reservoir door (14) and remove the water reservoir (15) from the cabinet. o Remove the water softener filter (11) from its connecting pipe and immerse it in a bowl of cold water for approximately five minutes prior to reconnecting.
o Restart the machine using the power ON/OFF switch (20). o You must start the drinks making process right from the beginning, as stated in the “Using your espresso maker” section (pages 15 – 17). 3) Filling the water reservoir (auto-fill mode) o Install the appliance as per the installation instructions contained in this booklet.
3a) What to do if the water level runs low during operation o If water in the water reservoir runs low during the drinks making process the low water level indicator (28) will start flashing. The espresso machine will stop any drinks making processes that are in progress.
Using your espresso maker IMPORTANT: Please note that the main boiler and the steam boiler CANNOT be operated at the same time. 1) Dispensing hot water through the main boiler o Follow the instructions on filling the water reservoir as stated previously and proceed as follows:- o Press the main boiler activation button (29) to allow the boiler to heat up.
o To dispense steam, press the steam boiler dispensing button (32). NOTE: Steam will dispense from the pipe for boiling water and steam (17). o To stop steam from dispensing, press the same button again. The noise generated during this operation is perfectly normal.
Page 17
NOTE: Boiling water will dispense from the pipe (for boiling water and steam) (17). o To stop boiling water from dispensing, press the same button again. The noise generated during this operation is perfectly normal. This is caused by the activation of the high pressure pump during this operation.
Making drinks Connecting the filter holder to the main boiler o Lift the filter holder (1) towards the filter holder ring nut (19); making sure that it is in the position shown in the drawing above. o Continue lifting the holder until it locates inside of the ring nut. o Turn the handle of the holder anti-clockwise, making sure that it is fully secured.
o To make a single dose of espresso, use the spout for a single coffee dose (2) and use one espresso cup. o To make a double dose of espresso, use the spout for a double coffee dose (3) and use two espresso cups. o Insert an appropriately sized coffee pod filter (4) or (6) into the filter holder (1).
o Using the supplied espresso coffee batcher (ground) (9) put the required amount of espresso coffee into the filter holder (1). o Use the coffee pressing tool (10) to pack down the espresso coffee in the filter holder. Place the filter holder into the filter holder ring nut (19) on the main boiler and lock it in position.
o The espresso cups should also be warmed before making any espresso drink. Tips on making a cappuccino An espresso topped with an equal amount of steamed milk and froth. o IMPORTANT: When making a cappuccino, the steam boiler should be heated before the main boiler in order to reduce the time taken to heat up the main boiler.
o Put the espresso shot into a large cup and then pour the heated milk from the jug into it. The froth achieved during the frothing process should be spooned over the top. o IMPORTANT: To get the best results, milk should semi-skimmed preferably room...
Cleaning and maintenance Cleaning operations must only be carried out when the coffee maker is cold. The appliance should be disconnected from your mains supply before commencing any cleaning process. Stainless steel sections o The stainless steel sections should be cleaned using warm soapy water.
Page 24
o Clean the water reservoir regularly using warm soapy water and make sure that the water reservoir has been rinsed thoroughly before being placed back in the machine. The drip tray o Pull the storage drawer forward and remove the drip tray. o You can either wash this drip tray in warm soapy water or wash it in a dishwasher.
A replacement water softener can be obtained from the Baumatic Spares Department. o When a new water softener is fitted, you should follow the filling the water reservoir instructions. INSTALLATION Installation of this appliance must be carried suitably qualified...
Installing the espresso maker into a kitchen cabinet o Ensure that the aperture that you will be fitting the coffee machine into is of the size given in the diagram above. o Ensure that the rear panel of the furniture housing unit has been removed and that the ventilation cut out shown is adhered to.
Page 27
o You must ensure that there is a hole to feed the electrical cable through. If you are going to connect the appliance to your mains water supply, then you must ensure that there is a hole to feed the inlet hose through too. These steps must be done before commencing the rest of the installation process.
Page 28
Do not proceed with the rest of the installation steps listed below, until you have completed the “Connecting the espresso maker to the mains water supply” section on the next page. You should also feed the electrical cable through the hole that you have made for it in the housing unit.
Connecting the espresso maker to the mains water supply Your coffee machine can be connected permanently to your mains water supply. IMPORTANT: The inlet hose used for connecting the appliance to the mains water supply should be suitable for supplying water for human consumption (FDA approved/MIN 5mm- MAX.
7. Insert the other end of the inlet hose into the coupling. 8. IMPORTANT: Test the joint connections for any leak by turning on the water supply. TROUBLESHOOTING My espresso machine will not work at all. o Check your mains supply and the electrical connection. My espresso machine will not dispense water.
All ‘LED’ light indicators flashing constantly o Switch off the appliance and restart after approximately 60 minutes. If the error still persists, contact the Baumatic Customer Care Department to arrange an engineer’s visit. Coffee glossary Caffe- Italian word for a standard espresso...
Page 32
Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the warranty card that you receive with the appliance.
BC005 Stainless Steel Cleaner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.uk...