Cleaning And Maintenance - Baumatic PECM1SS Instruction Manual

Semi-automatic built-in espresso coffee machine
Hide thumbs Also See for PECM1SS:
Table of Contents

Advertisement

Cleaning and maintenance

Cleaning operations must only be carried out
when the coffee maker is cool.
The appliance should be disconnected from your
mains supply before commencing any cleaning
process.
Stainless steel sections
o The stainless steel sections should be cleaned using warm soapy
water. Dry the appliance afterwards thoroughly with a soft cloth.
o No abrasive detergents or cleaners should be used.
o No abrasive sponges or steel wool should be used on any area of
the appliance.
Steam pipe
o You should flush the steam pipe through with steam after each
use.
o If you have used the froth maker, then you should remove it
from the steam pipe and wipe it over using a clean sponge or
cloth.
o When milk cools, it creates impurities which may block the
steam discharge hole and cause the appliance to function poorly.
Water reservoir
o If you are not going to use the appliance for a long period of
time, you should drain the boiler by following the "Dispensing
hot water" section on page 14.
o Press the hot water dispensing button (30) until the reservoir is
empty.
o If your appliance is connected to your mains water supply, you
should turn the machine off before it starts to refill the reservoir.
o Clean the water reservoir regularly using warm soapy water.
Make sure that the water reservoir is rinsed thoroughly before
being placed back in the machine.
24

Advertisement

Table of Contents
loading

Table of Contents