Table of Contents
Advertisement
o Switch the appliance on using the ON/OFF switch (20), the
ON/OFF neon (22) will light.
o Follow either the manual or automatic reservoir filling process.
o Once the machine has stopped filling and the water reservoir
empty neon (28) has gone out, press the water boiler ON/OFF
button (29). The water boiler neon (23) will flash to indicate
that the water boiler is heating up.
o The machine is ready to dispense hot water when the water
boiler neon (23) stops flashing and remains lit.
o To start coffee dispensing, press the hot water dispensing button
(30).
o To stop coffee from dispensing, press the hot water dispensing
button (30) again.
o Switch the appliance off using the ON/OFF switch (20).
o Release the filter holder (1) from the filter holder ring nut (19).
o When the pod has cooled sufficiently, remove it from the filter
holder (1).
o Wipe over the filter holder (1), the spout for 1 measure of coffee
(2) and the coffee pod filter that you have used (either (4) or
(5)) with a damp cloth to keep them in pristine condition.
Using ground coffee
o Screw the spout for 1 measure of coffee (2) onto the filter
holder (1).
o Insert the filter for one measure of ground coffee (5) into the
filter holder (1).
o Using the ground coffee measuring device (9) put one scoop of
ground coffee into the filter holder (1)
o Use the pressing tool (10) to pack down the ground coffee in
the filter holder and then connect it to the filter holder ring nut
(19).
o Place a suitably sized cup under the filter holder ring nut (1).
o Switch the appliance on using the ON/OFF switch (20), the
ON/OFF neon (22) will light.
19
Advertisement
Table of Contents
